H3C Technologies H3C WA3600 Series Access Points - Manual (Page 52)

39
If you have selected the box before "Check configuration with next startup configuration file",
the system checks the configuration before rebooting the device. If the check succeeds, the
system reboots the device; if the check fails, the system displays a dialog box to inform you that
the current configuration and the saved configuration are inconsistent, and does not reboot the
device. In this case, you must save the current configuration manually before you can reboot the
device.
If you have cleared the box, the system reboots the device directly.
Diagnostic information
Each functional module has its own running information, and generally, you need to view the output
information for each module one by one. To receive as much information as possible in one operation
during daily maintenance or when system failure occurs, the device supports generating diagnostic
information. When you perform the diagnostic information generation operation, the system saves the
running statistics of multiple functional modules to a file named default.diag, and then you can locate
problems faster by checking this file.
1. Select Device > Device Maintenance from the navigation tree.
2. Click the Diagnostic Information tab.
The page for configuring diagnostic information appears.
Figure 37 Diagnostic information
3. Click Create Diagnostic Information File.
The system begins to generate diagnostic information file, and after the file is generated, the page
in Figure 38 appears.
Figure 38 The diagnostic information file is created
4. Click Click to Download.
The File Download dialog box appears. You can select to open this file or save this file to the local
host.