beautypg.com

Configuring a rule for an advanced ipv6 acl – H3C Technologies H3C WA3600 Series Access Points User Manual

Page 376

background image

363

Item

Description

Source IP Address

Select the Source IP Address option and enter a source IPv6 address and prefix
length.
The IPv6 address must be in a format like X:X::X:X. An IPv6 address consists of
eight 16-bit long fields, each of which is expressed with two hexadecimal

numbers and separated from its neighboring fields by colon (:).

Source Prefix

Time Range

Select the time range during which the rule takes effect.

Configuring a rule for an advanced IPv6 ACL

1.

Select QoS > ACL IPv6 from the navigation tree

2.

Click the Advanced Setup tab to enter the rule configuration page for an advanced IPv6 ACL.

Figure 393 Configuring a rule for an advanced IPv6 ACL

3.

Configure the advanced IPv6 ACL rule information as described in

Table 118

.

This manual is related to the following products: