H3C Technologies H3C WA3600 Series Access Points - Manual (Page 148)

135
Table 60 Configuration items
Item Description
Host Name Configure the mapping between a host name and an IP address in the static domain
mane table.
Each host name corresponds to only one IP address. If you configure multiple IP
addresses for a host name, the last configured one takes effect..
Host IP Address
Configuring dynamic domain name resolution
1. Select Network > DNS from the navigation tree
2. Click the Dynamic tab to enter the page shown in Figure 136 .
3. Select the Enable option for Dynamic DNS.
4. Click Apply.
Figure 136 Dynamic domain name resolution configuration page
Adding a DNS server address
1. Select Network > DNS from the navigation tree.
2. Click the Dynamic tab to enter the page shown in Figure 136 .
3. Click Add IP to enter the page shown in Figure 137 .
4. Enter an IP address in DNS Server IP address field.
5. Click Apply.