Verifying the configuration, Figure 122 – H3C Technologies H3C WA3600 Series Access Points User Manual
Page 133
120
Figure 122 Configure a default route
Verifying the configuration
1.
Display the route table:
Enter the IPv4 route page of Switch A, Switch B, and AP respectively to verify that the newly configured
static routes are displayed as active routes on the page.
2.
Ping Host B from Host A (assuming both hosts run Windows XP):
C:\Documents and Settings\Administrator>ping 1.1.3.2
Pinging 1.1.3.2 with 32 bytes of data:
Reply from 1.1.3.2: bytes=32 time=1ms TTL=128
Reply from 1.1.3.2: bytes=32 time=1ms TTL=128
Reply from 1.1.3.2: bytes=32 time=1ms TTL=128
Reply from 1.1.3.2: bytes=32 time=1ms TTL=128
Ping statistics for 1.1.3.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms