H3C Technologies H3C WA3600 Series Access Points - Manual (Page 233)

220
Step Remarks
3. Configuring
HWTACACS
parameters
Optional.
This section describes how to configure the parameters that are necessary for
information exchange between the device and HWTACACS server.
Creating HWTACACS scheme system
1. If the HWTACACS scheme system does not exist, select Authentication > HWTACACS from the
navigation tree.
2. When the page shown in Figure 215 appears, click Add to create an HWTACACS scheme
named system.
Figure 215 Create HWTACACS scheme system
Configuring HWTACACS servers
1. Select Authentication > HWTACACS from the navigation tree to enter the HWTACACS server
configuration page.
Figure 216 HWTACACS server configuration
2. Configure HWTACACS servers as described in Table 85 .
3. Click Apply.