H3C Technologies H3C WA3600 Series Access Points - Manual (Page 62)

49
Figure 46 Save configuration confirmation
Common
1. Select Device > Configuration from the navigation tree.
2. Click the Save tab.
The page in
Figure 46 appears.
3. Click Save Current Settings to save the current configuration to the configuration file.
Initializing configuration
This operation restores the system to factory defaults, delete the current configuration file, and reboot the
device.
To initialize configuration:
1. Select Device > Configuration from the navigation tree
2. Click the Initialize tab
The initialize confirmation page appears.
Figure 47 Initialize confirmation dialog box
3. Click Restore Factory-Default Settings to restore the system to factory defaults.