H3C Technologies H3C WA3600 Series Access Points - Manual (Page 115)

102
Figure 101 ARP Table configuration page
Creating a static ARP entry
1. Select Network > ARP Management from the navigation tree to enter the default ARP Table page
shown in Figure 101 .
2. Click Add to enter the New Static ARP Entry page, as shown in Figure 102 .
Figure 102 Add a static ARP entry
3. Configure the static ARP entry as described in Table 48 .
4. Click Apply.
Table 48 Configuration items
Item Description
IP Address Enter an IP address for the static ARP entry.
MAC Address Enter a MAC address for the static ARP entry.