Setting guaranteed bandwidth – H3C Technologies H3C WA3600 Series Access Points User Manual
Page 415
402
Figure 425 Setting the reference radio bandwidth
3.
Set the reference radio bandwidth as described in
.
4.
Click Apply.
Table 135 Configuration items
Item Description
802.11a Mode
Set the reference radio bandwidth.
IMPORTANT:
Set the reference radio bandwidth slightly lower than the maximum available bandwidth..
802.11b Mode
802.11g Mode
802.11n Mode
NOTE:
After you set the reference radio bandwidth values, the new settings do not take effect for the radios with
bandwidth guarantee enabled. To make the new settings take effect, you must disenable and then enable
the radios.
Setting guaranteed bandwidth
1.
Select the desired radio on the radio list, and click its
icon to enter the page for setting
guaranteed bandwidth.
This manual is related to the following products: