H3C Technologies H3C WA3600 Series Access Points - Manual (Page 14)

1
About the WA series access points Web-based
configuration guide
The H3C WA series access points Web-based configuration guide describes the software features for the
H3C WA series access points and guide you through the software configuration procedures. These
configuration guides also provide configuration examples to help you apply software features to different
network scenarios.
Applicable models and software versions
The H3C WA series access points include WA2600 series and WA3600 series. This document
describes the software features for only fat APs. Table 1 shows the applicable models and software
versions.
Table 1 Applicable models and software versions
Series Model
WA2600 series
WA2600 series access points (indoors)
WA2612-AGN
WA2620-AGN
WA2610i-GN
WA2620i-AGN
WA2600 series access points (enhanced)
WA2610E-AGN
WA2620E-AGN
WA2600 series access points (outdoors) WA2620X-AGNP
WA3600 series WA3600 series access points (indoors)
WA3610i-GN
WA3620i-AGN
WA3628i-AGN
Feature matrix
• Support of the H3C WA series access points for features may vary by device model.
• The grayed out functions or parameters on the Web interface indicate that they are not supported
or cannot be modified.
• The displayed Web pages may vary depending on your AP model.
• The terms AP and fat AP in this document can refer to wireless bridges with fat AP functions.