H3C Technologies H3C WA3600 Series Access Points - Manual (Page 379)

366
Figure 394 Configuring priority trust mode
2. Configure the priority trust mode of the interfaces as described in Table 119 .
3. Click Apply.
Table 119 Configuration items
Item Description
Please select the interface type
Select the type of the ports to be configured. The interface types
available for selection depend on your device model.
Trust Mode
Select the priority trust mode:
• Dot1p—Uses the 802.1p priority of received packets for mapping.
• Dscp—Uses the DSCP value of received packets for mapping.
• Dot11e—Uses the 802.11e priority of received packets for mapping.
This option is applicable to only WLAN-BSS interfaces.
IMPORTANT:
Support for priority trust modes depends on the interface type.