H3C Technologies H3C WA3600 Series Access Points - Manual (Page 428)

415
Figure 446 Configuring continuous transmitting mode
2. Click the icon corresponding to the target radio to enter the page for configuring transmission
rate.
The transmission rate varies with radio mode.
When the radio mode is 802.11a/b/g, the page as shown in Figure 447 appears. Select a
transmission rate from the list.
Figure 447 Selecting a transmission rate (802.11b/g)
When the radio mode is 802.11n, the page as shown in Figure 448 appears. Select an MCS
index value to specify the 802.11n transmission rate. For more information about MCS, see
"Radio configuration."
Figure 448 Selecting an MCS index (802.11n)
3. Click Apply.
To stop the continuous transmitting mode, use either of the methods:
• Click the icon corresponding to the target radio.
• Select the target radio, and click Stop.
After the continuous transmit is stopped, the transmission rate value on the page as shown in Figure 446
is displayed as 0.