H3C Technologies H3C WA3600 Series Access Points - Manual (Page 431)

418
• The fast association function is disabled. By default, the fast association function is disabled. For
more information about fast association, see "Configuring access services."
• Band navigation is enabled for the AP. By default, band navigation is enabled for the AP.
• The SSID is bound to the 2.4 GHz and 5 GHz radios of the AP.
Configuring band navigation
1. Select Advance > Band Navigation from the navigation tree.
Figure 452 Configuring band navigation
2. Configure band navigation as described in Table 140 .
3. Click OK.
Table 140 Configuration items
Item Description
Band Navigation
• Enable—Enable band navigation.
• Disable—Disable band navigation.
By default, band navigation is disabled globally.
Session Threshold
• Session Threshold—Session threshold for clients on the 5 GHz band.
• Gap—Session gap, which is the number of clients on the 5 GHz band minus the
number of clients on the 2.4 GHz band.
If the number of clients on the 5 GHz radio has reached the upper limit, and the gap
between the number of clients on the 5 GHz radio and that on the 2.4 GHz radio has
reached the upper limit, the AP denies the client's association to the 5 GHz radio, and
allows new clients to associate to the 2.4 GHz radio.
By default, neither value is configured and the 5 GHz radio does not reject the access
from the client.
When you configure band navigation, configure both the session threshold and session
gap or configure none of them.
Gap