H3C Technologies H3C WA3600 Series Access Points - Manual (Page 374)

361
Figure 391 Adding an IPv6 ACL
3. Configure the IPv6 ACL information as described in Table 116 .
4. Click Apply.
Table 116 Configuration items
Item Description
ACL Number
Enter a number for the IPv6 ACL.
The value ranges of the ACL number vary by device.
Match Order
Select a match order for the ACL. Available values are:
• Config—Packets are compared against ACL rules in the order the rules are
configured.
• Auto—Packets are compared against ACL rules in the depth-first match order.
Description Set the description for the ACL.
Configuring a rule for a basic IPv6 ACL
1. Select QoS > ACL IPv6 from the navigation tree
2. Click the Basic Setup tab to enter the rule configuration page for a basic IPv6 ACL.