H3C Technologies H3C WA3600 Series Access Points - Manual (Page 27)

14
Figure 13 Radio configuration page
3. Check and apply the configurations:
Click Next to enter the configuration summary page.
If you want to modify certain configurations, click Back to return to the previous pages; if the
configurations are correct, click finish to apply the configurations.
Verifying the configuration
1. Launch the wireless client, and refresh the network list. Select the configured service in Choose a
wireless network (service in this example), and click Connect. The client can access the WLAN
network after being associated with the AP.
2. You can view the online clients on the page you enter by selecting Summary > Client from the
navigation tree.
WEP (Open-System) encryption configuration example
Network requirements
In a small office as shown in Figure 14 , perform WEP (Open-System) encryption configuration on the AP.
The following requirements must be satisfied:
• The AP provides a WEP (Open-System) encryption wireless service with SSID wep.
• 802.11n (2.4 GHz) is adopted.