H3C Technologies H3C WA3600 Series Access Points - Manual (Page 249)

236
3. Click Add to enter the guest configuration page.
Figure 231 Guest configuration page
4. Configure a single guest or a batch of guests as described in Table 90 .
5. Click Apply.
Table 90 Configuration items
Item Description
Create Users in a
Batch
Specify whether to create guests in a batch.
Username Specify a name for the guest when users are not created in a batch.
Username Prefix
Specify the username prefix and number for guests to be created in a batch.
For example, if you specify the username prefix as abc and number as 50, 50 guests
will be created, with the usernames abc0 through abc49.
Number of Users
Password Specify a password for the guest.
If you select the Same as the Username option, you do not need to enter the password
and confirm password, and the guest password is the same as the username.
If you do not select the Same as the Username option, you must enter the password and
confirm password, and they must be the same.
IMPORTANT:
Leading spaces of a password are ignored.
Same as the
Username
Confirm
Group
Select a user group for the guest.
For information about user group configuration, see "
Configuring a user group ."
ValidTime
Specify a valid time range for the guest, including the start time and end time.
When authenticating a local user with the valid time argument configured, the access
device checks whether the valid time has elapsed. If not, the device permits the user to
log in.