Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 86)

Cavium Processor Complex
ATCA-9305 User’s Manual (10009109-07) 86
3.6.1.3 Control Register
The write only Control register performs two functions:
 Writing a value of 0x01 causes the contents of the Data registers to be written to the FPGA
bridge at the location specified by the Address registers.
 Writing a value of 0x02 causes the contents of the Data registers to be overwritten by the
contents of the FPGA bridge at the location specified by the Address registers.
0 R/W Address 0
Table 3-13 Address 7:0 (0x5) (continued)
Bits R/W Function
Writing any other value to the Control register will be ignored.
Table 3-14 Control (0x6)
Bits R/W Function
7 - Reserved
6 -
5 -
4 -
3 -
2 -
1 W Read
0 W Write