Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 261)

Management Processor Monitor
ATCA-9305 User’s Manual (10009109-07) 261
ecc_1bit_repo
rt
off Select the reporting of single bit, correctable ECC errors to the
console (errors of 2 or more bits are always reported) Valid
options: on, off
ethaddr
00:80:F9:9
7:00:00-
00:80:F9:9
7:FF:FF ATCA-9305 board Ethernet address for TSEC_1 port, the last
digits are the board serial number in hex.
eth1addr
00:80:F9:9
8:00:00-
00:80:F9:9
8:FF:FF ATCA-9305 board Ethernet address for TSEC_2 port, the last
digits are the board serial number in hex.
fru_id
undefined Corresponds to ATCA-9305 processing resources
Valid options: Not defined in default configuration–reported at
bootup from the IPMC
gatewayip
0.0.0.0 Select the network gateway machine IP address
hostname
EMERSON_
ATCA-9305 Target hostname
icache
on Enables the processor L1 instruction cache
Valid options: on, off
ipaddr
0.0.0.0 Board IP address
inicmd
undefined Command to be executed immediately before jumping to the
monitor prompt or executing the boot command
l2cache
on Enables the L2 cache
Valid options: on, off
loadaddr
0x100000 Define the address to download user application code (used with
TFTP)
model
ATCA-9305 Board model number
ncip
undefined Sets the IP address and the destination port, format is
;
netmask
0.0.0.0 Board sub-network mask
powerondiags
on Turns POST diagnostics on or off after power-on/reset
Valid options: on, off
Table 9-6 Standard Environment Variables (continued)
Variable
Default
Value
Description