21 e-keying, System management – Artesyn ATCA-9305 User's Manual (May 2014) User Manual
Page 208
System Management
ATCA-9305 User’s Manual (10009109-07)
208
7.21 E-Keying
This section details the interfaces governed by E-keying and the protocols they support.
Specifically, this includes the interfaces implemented by this product and the E-keying
definition that corresponds to each interface.
The IPMC supports E-keying for the ATCA-9305 per PICMG
®
ATCA 3.0, Revision 2.0 and PICMG
3.1, Revision 1.0 specifications The E-keying information is stored in the ATCA Point-to-Point
Connectivity Record located in the Multi-Record area of the FRU Inventory Information (see
). The ATCA Point-to-Point Connectivity Record contains a Channel
Descriptor list, where each Link Descriptor details one type of point-to-point protocol
supported by the referenced channels.
Manufacturer Name
“Emerson”
Product Name
“ATCA-9305”
Product Part/Model Number
Variable, formatted as “10XXXXXX-YY-Z”
Product Version
Not used, same information is provided by the part number
Product Serial Number
Variable, formatted as “730-XXXX”
Asset Tag
Not Used
FRU File ID
Variable, for example: “fru-info.inf”
MultiRecord Area
E-Keying records
See “E-Keying”
Maximum Internal Current
“12.5 Amps”
Table 7-50 FRU Definition (continued)
Item
Description