Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 240)

Management Processor Monitor
ATCA-9305 User’s Manual (10009109-07) 240
Erase all of the sectors in all of the flash banks.
erase all
9.9.3 flinfo
The flinfo command prints out the flash device’s manufacturer, part number, size, number of
sectors, and starting address of each sector.
Definition
Print information for all flash memory banks.
flinfo
Print information for the flash memory in bank # N.
flinfo N
9.9.4 protect
The protect command enables or disables the flash sector protection for the specified flash
sector. Protection is implemented using software only. The protection mechanism inside the
physical flash part is not being used.
Definition
Protect all of the flash sectors in the address range from start to end.
protect on start end
Protect all of the sectors SF (first sector) to SL (last sector) in flash bank # N.
protect on N:SF[-SL]
Protect all of the sectors in flash bank # N.
protect on bank N
Protect all of the sectors in all of the flash banks.
protect on all