Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 158)

System Management
ATCA-9305 User’s Manual (10009109-07) 158
Response Data 3 Timer Actions
[7] reserved
[6:4] pretime-out interrupt
000b=none
001b=SMI
010b=NMI/Diagnostic Interrupt
011b=Messaging Interrupt (this would be the same interrupt as
allocated to the messaging interface)
100b, 111b =reserved
[3] reserved
[2:0] time-out action
000b=no action
001b=Hard Reset
010b=Power Down
011b=Power Cycle
100b, 111b=reserved
4 Pretime-out interval in seconds, ‘1’based
5 Timer Use Expiration flags (1b=timer expired while associated ‘use’ was
selected)
[7] reserved
[6] reserved
[5] OEM
[4] SMS/OS
[3] OS Load
[2] Monitor/POST
[1] Monitor FRB-2
[0] reserved
6 Initial countdown value, lsbyte (100 ms/count)
7 Initial countdown, msbyte
Table 7-10 Get Watchdog Timer Command (continued)
Type Byte Data Field