System management – Artesyn ATCA-9305 User's Manual (May 2014) User Manual
Page 141
System Management
ATCA-9305 User’s Manual (10009109-07)
141
C9
Parameter out of range–one or more parameters in the data field of the Request are
out of range. This is different from Invalid data field code (CC) because it indicates that
the erroneous field(s) has a contiguous range of possible values.
CA
Cannot return number of requested data bytes
CB
Requested sensor, data, or record not present
CC
Invalid data field in Request
CD
Command illegal for specified sensor or record type
CE
Command response could not be provided
CF
Cannot execute duplicated request–for devices that cannot return the response
returned for the original instance of the request. These devices should provide
separate commands that allow the completion status of the original request to be
determined. An Event Receiver does not use this completion code, but returns the 00
completion code in the response to (valid) duplicated requests.
D0
Command response could not be provided, SDR Repository in update mode
D1
Command response could not be provided, device in firmware update mode
D2
Command response could not be provided, Baseboard Management Controller (BMC)
initialization or initialization agent in progress
D3
Destination unavailable–cannot deliver request to selected destination. (This code
can be returned if a request message is targeted to SMS, but receive message queue
reception is disabled for the particular channel.)
D4
Cannot execute command, insufficient privilege level
D5
Cannot execute command, parameter(s) not supported in present state
FF
Unspecified error
Device-Specific (OEM) Codes 01-7E
01-7E
Device specific (OEM) completion codes–command-specific codes (also specific for a
particular device and version). Interpretation of these codes requires prior knowledge
of the device command set.
Command-Specific Codes 80-BE
80-BE
Standard command-specific codes–reserved for command-specific completion codes
(described in this chapter)
Table 7-2 Completion Codes (continued)
Code
Description