Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 215)

Back Panel Connectors
ATCA-9305 User’s Manual (10009109-07) 215
8.3 Zone 2
Zone 2 (ZD) defines backplane connector J23, which supports the data transport interface. The
Zone 2 connector array supports four interfaces to the AdvancedTCA backplane:
 Base Node Interface (J23) supports two Base channels (10/100/1000 BASE-T)
 Fabric Interface (J23) supports two Fabric channels (10GbE)
34 -48B third
Table 8-1 Zone 1 Connector, P10 Pin Assignments (continued)
Pin Signal Insertion Sequence
Figure 8-2 Zone 2 and 3 Connectors; J23, J30-J31
Table 8-2 Zone 2 Connector, J23 Pin Assignments
Row Interface AB CD EF GH
1 Fabric
Channel 2
TX2+ TX2- RX2+ RX2- TX3+ TX3- RX3+ RX3-
2 TX0+ TX0- RX0+ RX0- TX1+ TX1- RX1+ RX1-
3 Fabric
Channel 1
TX2+ TX2- RX2+ RX2- TX3+ TX3- RX3+ RX3-
4 TX0+ TX0- RX0+ RX0- TX1+ TX1- RX1+ RX1-
Row H
Row G
Row F
Row E
Row D
Row C
Row B
Row A
10 6 1 5