18 graceful reset, 18graceful reset, Table 7-34 – Artesyn ATCA-9305 User's Manual (May 2014) User Manual
Page 185: Graceful reset command, System management

System Management
ATCA-9305 User’s Manual (10009109-07)
185
7.11.18 Graceful Reset
The IPMC supports the Graceful Reboot option of the FRU Control command. On receiving
such a command, the IPMC sets the Graceful Reboot Request bit of the IPMC status, sends a
status update notification to the payload, and waits for the Graceful Reset command from the
payload. If the IPMC receives such a command before the payload communication time-out
time, it sends the 0x00 completion code (Success) to the carrier controller. Otherwise the 0xC3
completion code (Time-Out) is sent.
The IPMC does not reset the payload on receiving the Graceful Reset command or time-out. If
the IPMC participation is necessary, the payload must request the IPMC to perform a payload
reset. The Graceful Reset command is also used to notify the IPMC about the completion of the
payload shutdown sequence.
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Table 7-33 Bused Resource Status Command (continued)
Type
Byte
Data Field
Table 7-34 Graceful Reset Command
Type
Byte
Data Field
Request Data
1:3
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)