Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 140)

System Management
ATCA-9305 User’s Manual (10009109-07) 140
7.3.1 IPMI Completion Codes
All IPMI response messages contain a hexadecimal Completion Code field that indicates the
status of the operation.
30-3F OEM - 30 = command/request, 3F = response:
vendor specific: 16 network functions (8 pairs).
The vendor defines functional semantics for
cmd and data fields. The cmd field must hold
the same value in requests and responses for a
given operation to support IPMI message
handling and transport mechanisms. The
controller’s Manufacturer ID value identifies the
vendor or group.
Table 7-1 Network Function Codes (continued)
Hex Code
Value(s)
Name Type Name
Table 7-2 Completion Codes
Code Description
Generic Completion Codes 00, C0-FF
00 Command completed normally
C0 Node busy–command could not be processed because command-processing
resources are temporarily unavailable
C1 Invalid command–indicates an unrecognized or unsupported command
C2 Command invalid for given LUN
C3 Time-out while processing command, response unavailable
C4 Out of space–command could not be completed because of a lack of storage space
required to execute the given command operation
C5 Reservation canceled or invalid Reservation ID
C6 Request data truncated
C7 Request data length invalid
C8 Request data field length limit exceeded