Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 254)

Management Processor Monitor
ATCA-9305 User’s Manual (10009109-07) 254
Initialize environment variables and serial number in NVRAM and copy the monitor from the
socket to NOR (soldered) flash.
moninit[.1, .2]
Initialize environment variables and serial number in NVRAM but do not update the monitor in
NOR flash.
moninit[.1, .2] noburn
Initialize environment variables and serial number in NVRAM and copy the monitor from
into NOR flash.
moninit[.1, .2]
9.14.16 pci
The pci command enumerates the PCI bus. It displays enumeration information about each
detected device. The pci command allows you to display values for and access the PCI
Configuration Space.
Definition
Display a short or long list of PCI devices on the bus specified by bus.
pci [bus] [long]
Show the header of PCI device bus.device.function.
pci header b.d.f
Display the PCI configuration space (CFG).
pci display[.b, .w, .l] b.d.f [address] [# of objects]
Modify, read, and keep the CFG address.
pci next[.b, .w, .l] b.d.f address
Modify, automatically increment the CFG address.
pci modify[.b, .w, .l] b.d.f address