Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 73)

Cavium Processor Complex
ATCA-9305 User’s Manual (10009109-07) 73
Parameters
image-number (1 or 2)
Specifies whether to program the primary or backup image. If omitted, both images will be
updated.
octeon-processor (1 or 2)
Specifies which Octeon processor's image is to be updated.
image-address
Address of the binary image after loading it in memory. (e.g. via TFTP)
3.2.2 Cavium Reset
Each CN5860 can be reset independently of the other processor without affecting its
operation. This task is performed by the MPC8548 management processor.