Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 169)

System Management
ATCA-9305 User’s Manual (10009109-07) 169
Response Data 5 Bit [7] Graceful Reboot Request
If set to 1, indicates that the payload is requested to initiate the graceful
reboot sequence
Bit [6] Diagnostic Interrupt Request
If set to 1, indicates that a payload diagnostic interrupt request has
arrived
Bit [5] Shutdown Alert
If set to 1, indicates that the payload is going to be shutdown
Bit [4] Reset Alert
If set to 1, indicates that the payload is going to be reset
Bit [3] Sensor Alert
If set to 1, indicates that at least one of the IPMC sensors detects
threshold crossing
Bits [2:1] Mode
The current IPMC modes are defined as:
0 Normal
1 Standalone
2 Manual Standalone
Bit [0] Control
If set to 0, the IPMC control over the payload is disabled
Table 7-17 Get Status Command (continued)
Type Byte Data Field