Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 80)

Cavium Processor Complex
ATCA-9305 User’s Manual (10009109-07) 80
bootcmd
" " Command to execute when auto-booting or executing the
‘bootd’ command
bootdelay
0 Choose the number of seconds the Monitor counts down
before booting user application code
Valid options: time in seconds, -1 to disable autoboot
bootfile
" " Path to boot file on server (used with TFTP)–set this to
“path/file.bin” to specify filename and location of the file
to load.
ethaddr
undefined SPI 1 MAC address
eth1addr
undefined SPI 2 MAC address
ethact
octspi0 Specifies Ethernet port to use
gatewayip
0.0.0.0 Select the network gateway machine IP address
hostname
none Target hostname
ipaddr
0.0.0.0 Board IP address
loadaddr
0x20000000 Define the address to download user application code (used
with TFTP)
netmask
0.0.0.0 Board sub-network mask
powerondiags
off Turns POST diagnostics on or off after power-on/reset
Valid options: on, off
rootpath
eng/ Path name of the NFS’ server root file system
serial#
xxxxx Board serial number
serverip
0.0.0.0 Boot server IP address
stderr
serial Sets the standard destination for console error reporting
Valid options: serial, pci
stdin
serial Sets the standard source for console input
Valid options: serial, pci
stdout
serial Sets the standard destination for console output
Valid options: serial, pci
Table 3-6 Standard Cavium Environment Variables (continued)
Variable Default Value Description