Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 110)

Management Processor CPLD
ATCA-9305 User’s Manual (10009109-07) 110
5.1.7 LED
Writing a one to an LED bit lights that LED. During monitor power-up, the debug LEDs are used
to display the software progress.
4 SJ Cavium Boot Flash Jumper
0 Installed, Cavium processors boot from soldered flash
1 Not installed, Cavium processors boot from socket
3 BOOT Boot PCI Jumper
0 Installed, boot from flash (socket or soldered per bit 4)
1 Not installed, boot over PCI from the MPC8548
2 REDIR Boot Redirect Jumper
0 Installed, disables boot redirection
1 Not installed, enables boot redirection
1 IG ROM Ignore SROM
0 Not installed, SROM is used for initialization (default)
1 Installed, disables SROM, uses default values in monitor code
0 BT SKT
Boot from Socket
0 Not installed, enables MPC8548 to boot from soldered flash
(default)
1 Installed, enables MPC8548 to boot from socketed flash
Table 5-7 Jumper Settings (0x18) (continued)
Bits Function Description
Table 5-8 LED (0x1C)
Bits Function Description
7 PQRED MPC8548 red LED
Lit on power-up and turned off when the monitor finishes boot
up and Power-on Self Testing (POST)
6 PQGREEN MPC8548 green LED
5 SWLEDCLK Ethernet Switch LED Clock
4 SWLEDDAT Ethernet Switch LED Data