Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 166)

System Management
ATCA-9305 User’s Manual (10009109-07) 166
Response Data 6 Local Control Color
Bits [7:4] reserved, set to 0
Bits [3:0]
0h reserved
1h Blue
2h Red
3h Green
4h Amber
5h Orange
6h White
7h-Fh reserved
7 Override State LED Function–is required if either override state or Lamp
Test is in effect.
00h LED override state is off
01h-FAh LED override state is blinking Off duration is
specified by this byte, on duration specified by byte 8 (in tens of
milliseconds)
FBh-FEh reserved
FFh LED override state is on
8 Override State On Duration–is required if either override state or Lamp
Test is in effect (in tens of milliseconds).
9 Override State Color
Bits [7:4] reserved, set to 0
Bits [3:0]
0h reserved
1h Blue
2h Red
3h Green
4h Amber
5h Orange
6h White
7h-Fh reserved
Table 7-15 Get FRU LED State Command (continued)
Type Byte Data Field