Table 2: evs control request – SilentKnight 5820XL User Manual
Page 233
Cut Along the
Dotted
Line
PN LS10064-001SK-E Rev C
ECN 13-0792
Table 2: EVS Control Request
Operation
Task
Gain EVS Control at an LOC
Press the EVS Control Key and enter a code if prompted. If EVS Control is
available, the EVS Control LED will illuminate. If another LOC has EVS
Control, the display will be similar to the one shown. Press 1 to request control.
The LOC with EVS Control will then be able to allow or deny the request.
Gain EVS Control as EVS Super
User at an LOC (only one EVS
Super User is allowed EVS Control
in the system at a time).
From the idle screen, enter an EVS Super User access code and then press
the EVS Control Key. If EVS Control as Super User is available, the EVS
Control LED will illuminate. If another LOC has Super User EVS Control, a
request for Super User EVS Control will automatically be made to the LOC
with control. The LOC with Super User EVS Control will then be able to allow
or deny the request. (See Figure 1-2 for screen display example).
Select all output group for
microphone override
Key the microphone, press the All Call Key, wait for the Ready-to-Talk LED to
light, and then deliver your verbal message.
Select all non-activated output
groups for microphone override
Key the microphone, press the Non-Active Call Key, wait for the Ready-to-Talk
LED to light, and then deliver your verbal message.