SilentKnight 5820XL - Manual (Page 20)

LS10061-001SK-E
3-1
Section 3
Before You Begin Installation
This section of the manual is intended to help you plan your tasks to facilitate a smooth installation. Please read
this section thoroughly, especially if you are installing a 5820XL/EVS panel for the first time.
3.1 What’s in the Box?
The IntelliKnight 5820XL ships with the following hardware:
• A cabinet with all hardware assembled
• Two keys for the front door
• Two keys for user operation of the on-board annunciator (installer operations require the Installer’s Code)
• Ten 4.7K ohm end-of-line resistors
• A battery cable for batteries wired in series
The IntelliKnight 5820XL-EVS ships with the following hardware:
• A cabinet with all hardware assembled
• Two keys for the front door
• Two keys for user operation of the on-board annunciator (installer operations require the Installer’s Code)
• Ten 4.7K ohm end-of-line resistors
• A battery cable for batteries wired in series
• Ten 15K ohm end-of-line resistors
• EVS-VCM Voice Control Module
• Supervised microphone
3.2 Environmental Specifications
It is important to protect the IntelliKnight 5820XL/5820XL-EVS control panel from water. To prevent water
damage, the following precautions should be FOLLOWED when installing the units:
• Intended for indoor use in dry locations only
• Do not mount directly on exterior walls, especially masonry walls (condensation)
• Do not mount directly on exterior walls below grade (condensation)
• Protect from plumbing leaks
• Protect from splash caused by sprinkler system inspection ports
• Do not mount in areas with humidity-generating equipment (such as dryers, production machinery)
When selecting a location to mount the IntelliKnight 5820XL/ 5820XL-EVS control panel, the unit should be
mounted where it will NOT be exposed to: temperatures outside the range of 0°C-49°C (32°F-120°F) or
humidity exceeding 93% noncondensing.