3 erasing user message – SilentKnight 5820XL User Manual

Page 181

Model 5820XL / 5820XL-EVS Installation Manual

LS10061-001SK-E

9-17

Pressing Select Key 5 will start a playback of the recorded message.

Figure 9-9 Recording with Microphone Example

9.10.3

Erasing User Message

To erase the message stored in switch 1-15 memory location follow these steps:

Enter programming mode at main control panel.

Select option 9 Voice Options.

Select option 1 VCM Maintenance.

Select option 2 Local Recording. Once in this mode, the VCM/RVM will light all the green LEDs for
switches 1-15 indicating which message slots are occupied.

Select the amplifier and circuit for the audio to play through during programming. A user would generally
pick the audio circuit that is in closest proximity to them

Press EVS Message Key 8 on the EVS-VCM, press the Select Key 1-15 that you wish to erase. The Select
Key red LED will stay on until the erase is done. When erased, the Select Key green LED by corresponding
to the message slot you erased will go off.

Press

EVS Message

Select Key 5

Key to enter

to record to
this message
slot

message slot
selection mode

This manual is related to the following products:

5820XL-EVS