2 edit command priority, 3 edit command mapping, 4 edit timers – SilentKnight 5820XL User Manual
Page 145: Ion 7.10.3.2, Section 7.10.3.3, Section 7.10.3.4
Model 5820XL / 5820XL-EVS Installation Manual
LS10061-001SK-E
7-37
6.
Press the
or
arrow to toggle this selection between Yes or No, then press ENTER.
7.10.3.2
Edit Command Priority
1.
Select 7 for Program Menu.
2.
Select 9 for Voice Options.
3.
Select 3 for EVS System Options.
4.
Then select 2 for Edit Cmd Priority.
5.
Press
to select the voice command you want to change. It will be blinking.
6.
Press ENTER on the blinking command message to move.
7.
Press the
or
arrow to move the voice command to the appropriate priority location.
8.
Pressing ENTER will lock the message into its location.
9.
Repeat process to change priority of other message. Keep in mind the priority limitations described in sec-
tion 9.11.1.
7.10.3.3
Edit Command Mapping
1.
Select 7 for Program Menu.
2.
Select 9 for Voice Options.
3.
Select 3 for EVS System Options.
4.
The select 3 for Edit Cmd Mapping.
5.
Select the EVS Message for items described. See Table 9-3.
6.
Eight groups or templates can be entered in the following screen:
GXXX -CVC GXXX - CVC
GXXX -CVC GXXX - CVC
GXXX -CVC GXXX - CVC
GXXX -CVC GXXX - CVC
7.
If a voice group is entered in the GXXX field, the Cadence field will be filled with a CVC and the field is not
able to be edited.
8.
If a non-voice group is entered in the GXXX field, the user will be allowed to enter a Cadence value. See
example below:
G004 -CVC G001 - C03
7.10.3.4 Edit Timers
1.
Select 7 for Program Menu.
2.
Select 9 for Voice Options.
3.
Select 3 for EVS System Options.
4.
The select 4 for Edit Timers.
5.
From next menu, select 0 for Control Lockout.
6.
Press the
or
to select Immed/Timer/Never, then press ENTER. If timer is selected, enter the minutes
(Range 0-720), and seconds (Range 0 to 59), then press ENTER. (Default is 30 seconds).