SilentKnight 5820XL User Manual
Page 126
LS10061-001SK-E
Programming
7-18
7.5.2
Point Programming For Internal or External Power Module
To program for an internal or external power module points:
1.
Enter the installer code. The panel will automatically go to the main menu.
2.
Select 7 for Program Menu.
3.
Press 4 to enter point menu.
4.
Press the
or
arrows to select the desired module. Refer to Section 7.5.2 for available choices.
5.
Press ENTER.
6.
Enter the number of the circuit or point you wish to edit. Refer to Table 7-6 for available selections.
7.
Press ENTER.
8.
Select the type by pressing the
or
arrows.
9.
Press ENTER.
10. Select the function by pressing the
or
arrows.
11. Press ENTER.
12. Select the group by pressing the
or
arrows.
13. Press ENTER.
14. Edit point name. See Section 7.5.5. Or, press the right arrow to skip point name edit.
15. Repeat Steps 1 through 15 for all circuits.