5 point, 1 point programming for 5815xl module, Point – SilentKnight 5820XL User Manual
Page 122: Ion 7.5), On 7.5), N 7.5, Section 7.5.1, See section
LS10061-001SK-E
Programming
7-14
5.
Select output group number. See Figure 7-10.
Figure 7-10 Output Group Template Programming Screen
7.5
Point
You may need to change characteristics of individual input points (detectors and switches) even after using
JumpStart. This section explains how to change options for: type of point, latching/non-latching, silenceable/
non-silenceable, zone assignment (input points), detector accessory base options, group assignment (output
points), and point name.
7.5.1
Point Programming For 5815XL Module
To program points on 5815XL Module, follow these steps:
1.
Enter the installer code. The panel will automatically go to the main menu.
2.
Select 7 for Program Menu.
3.
Press 4 to enter point menu.
4.
Press the
or
arrows to select the desired module. Refer to Section 6.6 Quick Reference Table for
available choices.
5.
Press ENTER.
6.
Enter the number of the point you wish to edit.
7.
Press ENTER.
8.
Select the type of device by pressing the
or
arrows. Refer to Table 7-5 under column heading “Type
Selection” for a list of choices
9.
Press ENTER.
Output
Group #
Yes = Include the selected
output group in this template
No = Do Not include output
group in this template
Select the
Cadence Pattern