SilentKnight 5820XL - Manual (Page 204)

LS10061-001SK-E
12-1
Section 12
Installation Records
This section of the manual is for you to use if you wish to track of how points, zones, and groups have been
programmed.
12.1 Detector and Module Point Record
If installing SK SLC devices, use Table 12-1 to record detector points (up to 99 per SLC loop) installed on the
on-board SLC loop and make a copy of Table 12-2 to record installed modules (up to 99 per SLC loop). If
installing SD SLC devices, use Table 12-1 to record sensors and modules (up to 127) installed on the on-board
SLC loop and make copies, as needed, of Table 12-2 for 5815XL installed on the system.
Default addresses for ID: On-board: = 33; 5815-1: = 1; 5815-2: = 2
Table 12-1: Installation Record of Onboard Devices
Module Addr
Zone /
Group
Description Module Addr
Zone/
Group
Description
On-board 1 On-board 25
On-board 2 On-board 26
On-board 3 On-board 27
On-board 4 On-board 28
On-board 5 On-board 29
On-board 6 On-board 30
On-board 7 On-board 31
On-board 8 On-board 32
On-board 9 On-board 33
On-board 10 On-board 34
On-board 11 On-board 35
On-board 12 On-board 36
On-board 13 On-board 37
On-board 14 On-board 38
On-board 15 On-board 39
On-board 16 On-board 40
On-board 17 On-board 41
On-board 18 On-board 42
On-board 19 On-board 43
On-board 20 On-board 44
On-board 21 On-board 45
On-board 22 On-board 46
On-board 23 On-board 47
On-board 24 On-board 48
On-board 49 On-board 89
On-board 50 On-board 90
On-board 51 On-board 91
On-board 52 On-board 92