2 auto test time, 2 phone lines, Section 7.6.1.2 – SilentKnight 5820XL User Manual
Page 132: Section 7.6.2
LS10061-001SK-E
Programming
7-24
Telephone Number
Enter up to 24 characters for phone number for this account.
Figure 7-13 Edit Phone Number
The following special characters are available:
12. Use the number buttons on the annunciator or the up- and down-arrow keys to select special characters.
Characters begin displaying after “9”. See Figure 7-13 for an example.
7.6.1.2
Auto Test Time
To access the automatic dialer test time screen:
1.
Enter the installer code. The panel will automatically go to the main menu.
2.
Select 7 for Program Menu.
3.
From the Program Menu, select 5 for System Options.
4.
From the next menu, select 0 for Reporting Account.
5.
From the next menu, select 2 for Auto Test Time.
6.
Enter the hour you desire the control panel to send an automatic test report (or press the
or
arrow),
then press ENTER.
7.
Enter the minutes (or press the
or
arrow), then press ENTER.
8.
Select AM or PM by pressing the
or
arrow, then press ENTER.
9.
Select Report Time Interval by pressing the
or
arrow, then press ENTER. Time Interval selections
are 24hr, 12hr, 6hr and 4 hr.
7.6.2
Phone Lines
To access the phone lines screen:
1.
Enter the installer code. The panel will automatically go to the main menu.
2.
Select 7 for Program Menu.
3.
From the Program Menu, select 5 for System Options.
4.
Select 1 for the Phone Lines.
Table 7-8: Special Character for Dialing
#
Pound (or number) key on the telephone
*
Star key on the telephone
,
Comma (character for 2-second pause)