SilentKnight 5820XL - Manual (Page 147)

LS10061-001SK-E
8-1
Section 8
System Operation
Operation of the control panel is simple. Menus guide you step-by-step through operations. This section of the
manual is an overview of the operation menus. Please read this entire section carefully before operating the
panel.
Press ENTER to view Main Menu: Select the desired menu option. Enter your access code if prompted.
Note: See Section 7.9 for information on how to modify user access code profiles.
8.1 User and Installer Default Codes
User Code (factory-programmed as 1111).
Installer Code (factory-programmed as 5820).
8.2 Annunciator Description
Figure 8-1 shows the annunciator that is part of the control panel board assembly.
Figure 8-1 Control Panel Annunciator
8.2.1 LCD Display
The control panel LCD displays system messages, annunciates alarms, supervisories and troubles, provides
status information, and prompts for input. These messages can be up to 80 characters, displaying over four lines
of 20 characters each. Annunciator keys beep when they are pressed.
8.2.2 Banner
The banner is the message that displays on the control panel when the system is in normal mode (no alarm or
trouble condition exists and menus are not in use). A custom message can be created that will display instead of