SilentKnight 5808 User Manual
Intelliknight, Model 5808
Table of contents
Document Outline
- Contents
- Section 1 Introduction
- Section 2 Agency Listings, Approvals, and Requirements
- 2.1 Federal Communications Commission (FCC)
- 2.2 Underwriters Laboratories (UL)
- 2.2.1 Requirements for All Installations
- 2.2.2 Requirements for Central Station Fire Alarm Systems
- 2.2.3 Requirements for Local Protected Fire Alarm Systems
- 2.2.4 Requirements for Remote Station Protected Fire Alarm Systems
- 2.2.5 Requirements for Auxiliary Protected Fire Alarm Systems for Fire Alarm Service
- Section 3 Before You Begin Installing
- Section 4 Control Panel Installation
- 4.1 Mounting the Control Panel Cabinet
- 4.2 AC Connection
- 4.3 Battery Connection
- 4.4 SBUS Wiring
- 4.5 5860 Remote Annunciator Installation
- 4.6 5824 Serial/Parallel Printer Interface Module Installation
- 4.7 5880 LED I/O Module
- 4.8 5865-3 / 5865-4 LED Annunciator Installation
- 4.9 Configuring Modules
- 4.10 Telephone Connection
- 4.11 Notification Appliance/Auxiliary Power Circuits
- 4.12 On-Board Programmable Relays (Conventional)
- 4.13 Remote Station Applications
- Section 5 SK and SD SLC Device Installation
- Section 6 Programming Overview
- Section 7 Programming
- 7.1 UL 864 Programming Requirements
- 7.2 Modules
- 7.3 Zone
- 7.4 Group
- 7.5 Point
- 7.6 System Options
- 7.7 JumpStart Autoprogramming
- 7.8 Computer Account
- 7.9 Access Codes
- Section 8 System Operation
- 8.1 Default User and Installer Codes
- 8.2 Annunciator Description
- 8.3 Key Operation
- 8.4 Menu System
- 8.5 Basic Operation
- 8.5.1 Setting Time and Date
- 8.5.2 Disable / Enable NACs by Group
- 8.5.3 Disable / Enable a Template
- 8.5.4 Disable / Enable a Zone
- 8.5.5 Disable / Enable a Point
- 8.5.6 View Event History
- 8.5.7 Clear Event History
- 8.5.8 Conduct a Fire Drill
- 8.5.9 Conduct an Indicator Test
- 8.5.10 Conduct a Walk Test
- 8.5.11 Conduct a Dialer Test
- 8.5.12 Silence Alarms or Troubles
- 8.5.13 Reset Alarms
- 8.5.14 Check Detector Sensitivity Through Point Status
- 8.5.15 View Status of a Point
- 8.5.16 View Alarms, Supervisories or Troubles
- 8.5.17 View System Information
- 8.5.18 Reset Items
- 8.5.19 Communicating with a Remote Computer
- 8.5.20 Working with a Printer
- 8.6 Operation Mode Behavior
- 8.7 Releasing Operations
- 8.8 Smoke Alarm Verification
- Section 9 Reporting
- Section 10 Testing and Troubleshooting
- Section 11 Installation Records
- Appendix A Compatible Devices
- Appendix B Special Characters Lists
- Silent Knight Fire Product Warranty and Return Policy
- Manufacturer Warranties and Limitation of Liability
- Model 5808 Basic Operating Instructions