SilentKnight 5820XL - Manual (Page 117)

Model 5820XL / 5820XL-EVS Installation Manual LS10061-001SK-E
7-9
7.3.2 Add Zone
To add a zone, follow these steps:
1. Enter the installer code. The panel will automatically go the main menu.
2. Select 7 for Program Menu.
3. Press 2 to enter zone menu.
4. Press 2 to add a zone.
A zone of the next available zone number will be added. Options for this zone can now be programmed
through the Zone Edit sub-menu. Up to 125 zones can be used.
7.3.3 Delete Zone
To delete a zone, follow these steps:
1. Enter the installer code. The panel will automatically go the main menu.
2. Select 7 for Program Menu.
3. Press 2 to enter zone menu.
4. Press 3 to delete a zone.
5. Choose Zone to be deleted.
A warning screen will display. If you want to proceed with deleting the zone, select Yes. To cancel, select
No.
7.3.4 View Zone Points
To view the points in a zone, follow these steps:
1. Enter the installer code. The panel will automatically go the main menu.
2. Select 7 for Program Menu.
3. Press 2 to enter zone menu.
4. Press 4 to view zone points.
5. Enter the number of the zone you wish to view, then press ENTER.
Figure 7-7 View Zone Points Screen
Zone Number
Module or
Device Address
Point Number
Total Number of
Points in the Zone