Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 60)

Publication 2100-UM001B-EN-P – January 2001
4-24 Configuring a Scanner to Communicate with the Adapter
allows the user to choose which components the scanner will scan for
data. The Input and Output tabs are for setting up where the data
from the scanned devices is kept for use by the SLC processor.
Finally, the Summary tab allows the user to view a concise summary
of how the scanner has been configured.
2. On the General page, place the cursor in the name field and type
the name you want to assign the scanner. If you want to add a
description to the scanner, place the cursor in the description field
and enter a description. Click on the Apply button to save the
information.
3. Click on the Module tab. A dialog box will appear requesting to
upload or download information from the scanner. Click on
Upload. The scanlist information currently stored in the scanner
will be uploaded. Once the upload is complete, the Module
screen will appear.
Figure 4.32
1747-SDN Module Configuration Screen
Verify the default values listed on this page. Edit them as necessary.
Refer to RSNetWorx for DeviceNet online help for more information.
4. Click Apply to save.
5. Click on the Scanlist tab so that the Scanlist page appears.
Step #4