Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 25)

Publication 2100-UM001B-EN-P – January 2001
Installation 2-5
Figure 2.1
Dip Switch Access - Side View of 2100-GK61 Module
2. Determine a suitable mounting location within a desired location
close to its interconnecting devices and /or components.
When choosing a suitable mounting location, allow 1.0” (2.54cm)
clearance from the front of the module to the door of the enclo-
sure or other devices. This clearance is needed for DeviceNet wir-
ing harness/bend radius.
Dip Switch Location
1 2
!
ATTENTION: The 2100-GK61 module is an open
panel device and must be mounted inside a suitable
enclosure.