Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 204)

Publication 2100-DU021B-EN-P - January 2004
Ladder Logic Programming—Including Reading Inputs 5-19
Rungs 9 and 10 show how SMP-3 Status Word information is read. The
Output card in slot 2 shows status at bits 4 and 5.
Figure 5.14
The next word after Status word is analog information from SMP-3.
Average Current, Current Imbalance, Thermal Capacity Utilized, and Full
Load Current Setting can be monitored. The parameter to be monitored is
selected by logic state of bits 13-15 in the Logix Control Word.