Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 54)

Publication 2100-UM001B-EN-P – January 2001
4-18 Configuring a Scanner to Communicate with the Adapter
5. Click on the Scanlist tab so that the Scanlist page appears.
Figure 4.24
Scanlist Screen
6. Select the available devices you wish to add to the scan list.
Verify that the Automap on Add box is checked. This will map
the devices into the scanner’s memory automatically when added.
Refer to the RSNetWorx for DeviceNet help menu for additional
information on automapping. Once a device is selected, click on
the Add (>) or Add All (>>) button.
Figure 4.25
Scanlist Configuration Screen
Step #6
Step #6
Step #7