Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 17)

Publication 2100-UM001B-EN-P – January 2001
Overview 1-5
SCANport Products Some SCANport products support one peripheral; others support up
to six peripherals. The table below lists SCANport products, the
number of peripherals each supports, the minimum and maximum I/O
words, and the type of adapter that can be used.
Important: To connect multiple peripherals to a SCANport product,
a port expander may be required. Refer to your product’s
documentation for more information.
Important: If you intend to use datalinks to communicate with and
control your SCANport product, verify that your SCANport product
supports datalinks before enabling them in the adapter.
Product
Number of
Peripherals
Supported
I/O Words Adapter Use
Minimum Maximum 2100-GK61
1305 AC MICRO Drive 5 0 10 Yes
1336 IMPACT™ Drive 6 ➀ 0 10 Yes
1336 PLUS AC Drive 6 ➀ 0 10 Yes
1336 PLUS II Drive 6 ➀ 0 10 Yes
1336 FORCE™ Drive 6 ➀ 0 10 Yes
1394 AC Mult-Axis Motion
Control System 5 0 10 Yes
SMC Dialog Plus 1 0 2 Yes
SMP-3 Smart Motor Protector 2 0 2 Yes
1397 Digital DC Drive 5 0 10 Yes
1557 Medium Voltage Drive 5 0 10 Yes
➀ Lower horsepower products may not support a sixth peripheral. Refer to your user manual to verify that your
product supports a sixth peripheral.