Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 3)

Publication 2100-UM001B-EN-P – January 2001
Preface
Using this Manual
Objectives Read this preface to become familiar with the organization of the
manual. In this preface, you will read about the following:
• Who should use this manual.
• An overview of the DeviceNet to SCANport Communication
Module with Digital Inputs.
• The purpose of this manual.
• Terms and abbreviations.
• Conventions used in this manual.
• Rockwell Automation support.
Who Should Use this Manual? Use this manual if you are responsible for installing, wiring,
programming, or troubleshooting control systems that use the
DeviceNet to SCANport Communication Module with Digital Inputs.
This manual is intended for qualified service personnel responsible
for setting up and servicing the DeviceNet to SCANport
Communication Module with Digital Inputs. You must have previous
experience with and a basic understanding of electrical terminology,
programming procedures, networking, required equipment and
software, and safety precautions.
Purpose of this Manual This manual is a learning and reference guide for the DeviceNet to
SCANport Communication Module with Digital Inputs. It describes
the procedures needed to install, configure, and troubleshoot the
adapter.
Related Publications
Title Publication Number
1771-SDN Scanner Configuration Manual 1771-6.5.118
DeviceNet Scanner Configuration Manual 1747-6.5.2
DeviceNet Cable System Planning and Installation
Manual DN-6.7.2