Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 124)

Publication 2100-UM001B-EN-P – January 2001
7-4 Troubleshooting
Input Status LED States The row of LED’s furthest right on the front of the module are the
Input Status LED’s and function as follows:
LED
Viewed:
If: State: Indicates Action:
1
LED is Red Input Off No power to input
1. Input is off. No action is required.
2. Power is missing from Input 1, verify
external wiring to module.
3. Verify DIp Switch setting matches Input
voltage.
LED is Green Input On
Input has power
applied
1. Input is on. No action is required.
2. Voltage is applied to Input, verify external
wiring to module.
2
LED is Red Input Off No power to input
1. Input is off. No action is required.
2. Power is missing from Input 2, verify
external wiring to module.
3. Verify DIp Switch setting matches Input
voltage.
LED is Green Input On
Input has power
applied
1. Input is on. No action is required.
2. Voltage is applied to Input, verify external
wiring to module.
3
LED is Red Input Off No power to input
1. Input is off. No action is required.
2. Power is missing from Input 3, verify
external wiring to module.
3. Verify DIp Switch setting matches Input
voltage.
LED is Green Input On
Input has power
applied
1. Input is on. No action is required.
2. Voltage is applied to Input, verify external
wiring to module.
4
LED is Red Input Off No power to input
1. Input is off. No action is required.
2. Power is missing from Input 4, verify
external wiring to module.
3. Verify DIp Switch setting matches Input
voltage.
LED is Green Input On
Input has power
applied
1. Input is on. No action is required.
2. Voltage is applied to Input, verify external
wiring to module.