Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 34)

Publication 2100-UM001B-EN-P – January 2001
3-4 Configuring the DeviceNet to SCANport Communication Module with Digital Inputs
Figure 3.2
Online Screen
5. The network will be scanned and the screen will build the online
configuration as shown in Figure 3.3.
Figure 3.3
RSNetWorx Graphical View
In Figure 3.3, Node 00 is scanner, Node 62 is the PC, and Node 63 is
the module we are configuring.
Your module appears as Node 63 by default. If you have changed its
node address parameter and reset the module, its new node address
will appear on the screen.
Step #3
Step #4