Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 149)

Publication 2100-UM001B-EN-P – January 2001
DeviceNet to SCANport Communication Module with Digital Inputs Parameters B-23
39 Peer B Output Off
Cmd/Ref
DL A Input
DL B Input
DL C Input
DL D Input
DL A Output
DL B Output
DL C Output
DL D Output
Off Yes No Determines the source of peer B output data in
the SCANport product.
Important: This parameter cannot be changed
when the Peer Out Enable (40) parameter is On.
40 Peer Out
Enable
On, Off Off Yes No Off = Disables peer output communications.
On = Enables peer output communications.
41 Peer Out Time 0.01 – 10.00 1.00 Yes No Determines the minimum interval of time
between peer transmissions.
42 Peer Out Skip 1 – 16 1 Yes No Determines the maximum interval of time
between peer transmissions by multiplying this
value by the value in the Peer Out Time (41)
parameter.
# Name
Valid Values/
Settings
Default Writable
Reset or
Power
Cycle
Description
Important: For information on accessing and editing parameters, refer to Chapter 3, Configuring the DeviceNet to SCANport
Communication Module with Digital Inputs.